CP-E ΔCORE FORD FIESTA ST FMIC FRONT MOUNT INTERCOOLER
After months of engineering and development, cp-e™ released the ΔCore (DeltaCore) Ford Fiesta ST FMIC. The stock intercooler does an excellent job for the everyday driver that doesn’t want to modify their car. However, once you find that itch to go faster, the intercooler is a must have modification.
Fiesta ST FMIC Features
- Low Turbulence End Tank Design
- Minimal Pressure Drop
- Maximized Core Design
- Substantially Lower & More Consistent Charge Temps
- Bolt-in Design, No Vehicle Modification Needed
- Fully Cast End-Tanks
cp-e™ started off by determining the maximum size core that could fit without major modification to the vehicle. Our Ford Fiesta FMIC uses the bar and plate design to help ensure a high level of efficiency.
cp-e™ then set their sights on designing the perfect Fiesta ST FMIC end-tanks, developing a design that not only encloses the monstrous core, but also requires no cutting, no drilling, and no permanent modification to the vehicle. With the laser cut brackets, the intercooler will mount in the stock location while matching up to the stock intercooler piping. Customers can now upgrade their piping when their power demands need it and modify in smaller increments.
As always, the cp-e™ intercooler includes cast end-tanks that are welded and pressure tested with the core. What sets these end-tanks from the rest is the engineering behind their shape and internal design. Hours of design and computer flow diagrams have been put into the tanks’ design to virtually eliminate turbulence within them. Many times, upgrading an intercooler causes increased turbo-lag, and an overall pressure loss. This is because of the large size of the core and the turbulence within the end tanks. By designing the end-tanks to be smaller, and more efficient cp-e™ has found a way to minimize turbulence in order to keep the drivability of the car high, while still enlarging the intercooler drastically.
The internal design of the end tanks directs the air to bring the most optimal airflow as well as an even distribution throughout the core. In intercoolers, the back half of the core only does 25% of the cooling. The end tanks have been designed to direct the air properly into the core for the most even cooling, giving the vehicle the most consistent conditions going into the engine.
Fiesta ST FMIC Highlights
Turbulence Reduction Fins
When creating an intercooler, the goal is to maximize size, while not increasing pressure drop. Larger cores almost always exhibit some form of pressure drop, due to the massive turbulence in a large core. cp-e™ has engineered a way around this by adding our carefully calculated turbulence reduction fins to smooth out the airflow from the end tanks to the main core.
In the real world this translates to extraordinarily low pressure drop and no loss in spool times.
Fully Cast End Tanks
When durability and high horsepower are the main goals, nothing beats casting. Cut and weld sections just don’t have close to the reliability of a cast piece. The problem is that casting is too expensive and out of reach for many manufacturers.
With the ultimate product as our end goal, we only accept fully cast end tanks for all of our front mount intercoolers.
1. Store Orders Fulfilment Information
All orders are subject to product availability. As U.K stock of items increases, more and more products are available for delivery within 3 working days. However many items that we offer, may only be available at the manufacturer and can take time to get in for you.
Wherever possible, we aim to fulfil all orders within 15 working days. In instances like this where the three days are exceeded, we will inform you and aim to keep you updated.
In extreme circumstances, some products may only be manufactured to order, these delivery times can be over a month from the purchase date. We will contact you to let you know if this is the case before we place the order with the manufacturer.
In any case, please feel free to contact us for an ETA or updates on your order once it is placed.
2. Services General Information
When booking services with us, the booking date will reflect stock availability. In some cases we may require a deposit from you at the time of booking.
In instances where service pricing is listed as 'from', the minimum price of the service is being advertised and the actual price will vary, dependant on the work required for your specific vehicle and potential option variants.
3. Pricing and Information Disclaimer
All prices and descriptions on this website are subject to change without notice. Whilst we make every effort to provide you with the most accurate, up-to-date information, occasionally, one or more items on our website may be mis-priced or mis-represented. In the event that a product is listed incorrectly due to typographical, photographic, a technical error or error in information received from our suppliers, Motorsport and Performance Ltd shall have the right to refuse or cancel any orders placed.
If an item's correct price is lower than our stated price, we will refund the difference before shipping you the item.
If an item's correct price is higher than our stated price, we will notify you of the price error and give you the option to proceed with the order at the correct price or cancel the order.
