Description
Hard launches from high horsepower cars at the drag strip require more than just a normal street-style anti-roll bar (sway bar). BMR Suspension’s Xtreme Anti Roll Bar for 2005-2014 Mustang or 2007-2014 Shelby GT500 allows you to launch harder without excessive body roll limiting traction, with little sacrifice to your Mustang’s street manners. Manufactured from heavy-wall 1.375-inch DOM tubing, BMR’s Xtreme Anti Roll Bar (XSB005) is designed to eliminate body roll and transfer as much power as possible to the rear wheels. The XSB005 attaches to your Mustang with polyurethane bushings. These bushings are moulded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing under high compression loads. The fabricated laser cut, steel anti-roll bar arms are reinforced to add strength and minimise deflection.
BMR Suspension designed the XSB005 anti-roll bar for street performance and drag race applications. The large adjustable anti-roll bar has three positions, giving you the versatility to drive to the track and race at the track with the same anti-roll bar. The XSB005 gives you as much as 4,090% increase (2,430%, 3,080%, and 4,090%) in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to almost eliminate body roll so you can leave the starting line harder with maximum traction. The hollow design gives you loads of strength without adding a lot of weight. When performance is a must, rely on BMR Suspension!
BMR Suspension’s XSB005 anti roll bar is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the USA!
NOTE: Recommended for drag race applications only. Minimal welding necessary.
Key features
- Designed for street performance and drag race applications
- Dramatically reduces body roll
- Up to 4,090% increase is anti-roll bar rate over stock anti-roll bar (depending on year and model)
- Cold formed to better resist torsional fatigue
- Manufactured from 1.375-inch heavy-wall DOM tubing for increased strength
- Three-way adjustable for street and track use
- Adjustability allows for fine-tuning of suspension
- 88-durometer, greasable polyurethane bushings
- Durable powdercoat finish
- 1-2-hour installation time
- Designed and made in the USA by BMR Suspension
Fitment
- Fits: 2005-2014 Ford Mustang S197
- Specification: Hollow 35mm
- Finish: Black Hammertone or Red
- Part number: XSB005H / XSB005R
Supplied or fitted by Motorsport and Performance
We supply and fit BMR Suspension parts at our Leeds workshop. Want it done properly? Get in touch and we’ll book your car in, or help you check fitment before you order.
