Description
Reduce body roll and improve the handling of your 2012 Camaro with a Anti-roll bar (sway bar) Kit from BMR Suspension! Stock anti-roll bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR’s Anti-roll bar Kit (SB037) increases anti-roll bar rate over the OE bars and is designed for street performance, autocross, and road racing applications. When performance is a must, rely on BMR Suspension!
Key features
- Includes SB016 (Front) and SB033 (Rear)
- Manufactured from 29mm (Front) and 32mm (Rear) DOM steel tubing
- Designed for 2012 Camaro SS’s with FE3 front/FE4 rear suspension
- Greaseable 88-durometer polyurethane bushings
- Thrust washers allow for proper location of the anti-roll bar and prevent lateral movement
- Cold-formed to better resist torsional fatigue
- 3-hole adjustable front and rear bar
- Increases anti-roll bar rate and allows for fine tuning of your Camaro’s handling characteristics
- Dramatically reduces body roll
- Greater anti-roll bar control allows for better handling of your vehicle
- Available in red or black hammertone powder coat for long lasting good looks
- 3-4 hour installation time
- BMR’s SB037 is not compatible with 2012 ZL1s due to the electric power steering rack and recommends the SB039 instead.
- BMR’s SB037 is not compatible with convertible Camaros or Camaros equipped with V6s due to the SB033 rear bar.
- BMR’s SB033 rear bar inside kit SB037 is designed as a direct replacement for FE4 rear suspension systems where the anti-roll bar end links are located outboard of the rear shocks. 2010-2012 Camaro SS’s may upgrade to this FE4 bar if the rear lower control arms and rear anti-roll bar end links are upgraded to FE4 spec.
- Hole 1 (Boot-leg end of bracket) = 98% increase in anti-roll bar rate
- Hole 2 = 146%
- Hole 3 = 214%
- OE SS Bar (FE4)
- OE ZL1 Bar (FE5)
- Designed and made in the USA by BMR Suspension
Fitment
- Fits: 2012-2012 Chevrolet Camaro
- Specification: Front and Rear
- Finish: Black Hammertone or Red
- Part number: SB037H / SB037R
Supplied or fitted by Motorsport and Performance
We supply and fit BMR Suspension parts at our Leeds workshop. Want it done properly? Get in touch and we’ll book your car in, or help you check fitment before you order.
