Description
The two primary functions of anti-roll bars (sway bars) are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock anti-roll bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension’s SB054 rear anti-roll bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 1.25-inch DOM steel tubing, the SB054 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The anti-roll bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB054 attaches to your 2016-newer Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are moulded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.
BMR Suspension designed the SB054 anti-roll bar for street performance, autocross, and road race applications. The three-way adjustable SB054 gives you a 73%-125% increase in rate over the stock bar. The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more anti-roll bar control, which equals better handling. When performance is a must, rely on BMR Suspension!
BMR Suspension’s SB054 anti-roll bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the USA!
****Does Not Fit Convertible Cars****
Key features
- Designed for street performance, autocross, and road race applications
- Dramatically reduces body roll
- 73%-125% increase is anti-roll bar rate over stock anti-roll bar
- Cold formed to better resist torsional fatigue
- Manufactured from 1.25-inch heavy-duty DOM steel tubing for increased strength
- Three-way adjustable design
- 88-durometer, greasable polyurethane bushings
- Zinc-plated inner sleeves
- Durable powdercoat finish
- 1-2-hour installation time
- Designed and made in the USA by BMR Suspension
Fitment
- Fits: 2016-2024 Chevrolet Camaro
- Specification: Hollow, Adjustable
- Finish: Black Hammertone or Red
- Part number: SB054H / SB054R
Supplied or fitted by Motorsport and Performance
We supply and fit BMR Suspension parts at our Leeds workshop. Want it done properly? Get in touch and we’ll book your car in, or help you check fitment before you order.
