Description
These DBA 4000 Series Plain brake discs fit the 2015-2023 Ford Mustang S550 (rear axle), with a 330mm diameter.
DBA 4000 Series discs are single-piece performance brake discs, cast from DBA’s XG150 high carbon alloyed iron for greater thermal capacity, reduced fade and a longer service life than standard replacement discs. Supplied as a pair (2 discs) for one axle.
4000 Series disc brake discs are a direct replacement single piece brake disc, designed for drivers seeking upgraded braking above and beyond standard OE levels.
4000 Series HD features a smooth OE style disc finish, popular for drivers looking for the benefits of a 4000 Series disc but requiring an OE style look, such as controlled race divisions.
Cast from high carbon alloyed iron and undergoing Thermal Stability Profiling, DBA’s metallurgy can handle the increased stress and heat generated under intense braking applications, time and time again.
Featuring DBA’s Kangaroo Paw ventilation that implements a series of 144 diamond and teardrop patterned pillars, DBA achieves up to a 30% increase in surface area and 20% improvement in cooling efficiency (as compared to a traditional straight vane design).
Specifications
- Diameter (mm): 330
- Thickness (mm): 25
- Minimum Thickness (mm): 23
- Height (mm): 43.70
- Number of Holes: 5
- Inner Diameter (mm): 71.00
- Disc Vent: Kangaroo Paw
- Type / Series: 4000 Series Plain
Vehicle Fitment
- Ford Mustang (6th Generation) 2.3 Turbo 317BHP Vented Rear Discs (2015-2024) (Rear)
- Ford Mustang (6th Generation) 5.0 416BHP (2015-2024) (Rear)
Fits: 2015-2023 Ford Mustang S550
Part No.: DBA42165 (x2)
Supplied or fitted by Motorsport and Performance
We supply and fit DBA brake discs and pads at our Leeds workshop. Want it done properly? Get in touch and we’ll book your car in, or help you check fitment before you order.
Your Questions, Answered
It fits the Ford Mustang (6th Generation) 2.3 Turbo 317BHP Vented Rear Discs (2015-2024) (Rear); Ford Mustang (6th Generation) 5.0 416BHP (2015-2024) (Rear). This is the rear axle. DBA part number: DBA42165 (x2). Send us your registration and we will confirm fitment before you order.
Yes. They’re supplied as a pair (two discs) for one axle.
330mm diameter, 25mm thick, minimum thickness 23mm, 5 stud holes.
Featuring DBA’s Kangaroo Paw ventilation that implements a series of 144 diamond and teardrop patterned pillars, DBA achieves up to a 30% increase in surface area and 20% improvement in cooling efficiency (as compared to a traditional straight vane design).
It uses DBA’s Kangaroo Paw vent design.
Yes. We supply and fit DBA brakes at our Leeds workshop. Get in touch to book your car in.
Note: specifications on this page are DBA’s own claims, not figures tested by Motorsport and Performance. Results vary by vehicle and setup.

