Description
The Steeda ProFlow Open Cold Air Intake maximizes the potential of your induction system. Designed by Steeda engineers and put to the test with real track time, this intake will give your S550 an edge. The vehicle-specific design makes use of the factory air duct and draws in fresh and dense air. A roto-molded air-box assembly shields the intake from the hot air of the engine bay and makes sure your 5.0L engine is making peak power. Engineered using CFD (computational fluid dynamics) the intake has been optimized for airflow. Smooth bends and curves in the intake, combined with a high-flow nanofiber mesh air filter, ensure unrestricted airflow. The filter attaches to a specially designed velocity stack that helps to draw in a larger volume of air and increase the speed of air getting pulled into your engine. Steeda’s 114mm mass airflow housing is built into the intake tube and generates a clean signal for smooth throttle response and outstanding drivability.
Steeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company. The attention to detail that was put into designing this kit is unlike that of any other brand. Steeda went the extra mile to design the kit to work with the Gen 3 Coyote engine covers so that there is no need to modify or cut the cover. This allows you to maintain that clean look that the stock engine bay has. You have the option to delete the sound tube that sends intake noise into the cabin or delete the sound tube for a quieter cabin.
If you are looking for an intake system that is designed for your S550 by real racers, enthusiasts, and owners of Mustangs, this is the kit for you. Designed, engineered, and manufactured in-house, right here in the USA. With over 30 years of experience racing and building performance parts for Mustangs, you can be sure that Steeda is the name you can trust.
NOTE: CAI requires a new tune for correct operation
Product Benefits
- Over 30 rwhp and 23 ft/lb tq gain with a tune!
- Does not require cutting of the engine cover
- Prevents heat soak, unlike the factory airbox
- Cools to ambient temperature range significantly faster than the stock unit
- Outperforms all other cold air intakes on the market today
- Installs in the factory location and uses the factory snorkel for easy installation
- Provides the needed parts to keep or delete the sound tube
- Increase in power across the full RPM range, not just peak power
- Lower IAT (intake air temperatures) at cruise when compared to the competition
- Lifetime warranty
- Normally in stock in the UK
Options:
Available as a standalone CAI or in a Powerpack with a SCT X4 device and Steeda Tune. If you opt for the CAI on it’s own you will need to source your own tune as the CAI . If you opt for the CAI with powerpack then you need to select the relevant version 2015-2017 or 2018+. Select the OPTION that applies.
To Find out more about the SCT Handset and Steeda Tunes for Life – Click Here
Tuning User Guide – Click Here
Open CAI Install Guide – Click Here
Part Numbers:
555-3228 – Open CAI
555-3202 – 555-3228 + SCT X4 + Steeda Tune for 2015-2017
555-3202-18 – 555-3228 + SCT X4 + Steeda Tune for 2018+
STEEDA UK PRO TIP!
- If you have ordered the powerpack make sure you plug your SCT X4 into your PC and update before trying to do anything with your car!
- Tuning files are usually received 7-15 working days after Steeda Tuning receives your online tuning form. During busy times this can take longer.
- With TUNE ONLY Intakes make sure you receive your tune BEFORE installing the hardware
Reviews
There are no reviews yet.