Description
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behaviour of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small-diameter bar stock or tubing. BMR Suspension’s SB044 S550 Mustang front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 35mm DOM tubing, the SB044 is cold-formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering manoeuvres. The sway bar is mounted to the car using polyurethane bushings. These bushings are moulded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing. The billet aluminium sway bar mounting brackets minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.
BMR Suspension designed the SB044 sway bar for street performance, autocross, and road race applications. The large adjustable sway bar’s three positions give you the versatility to drive to and from the road course or autocross and still outhandle the competition with the same sway bar. The SB044 front sway bar gives you a 62%-297% increase in sway bar rate. These rate increases and adjustability allows you to fine-tune the handling characteristics of your S550 Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB044 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!
BMR Suspension’s SB044 sway bars are available in black hammerstone and red powder coat for long-lasting good looks. Proudly made in the U.S.A.!
Reviews
There are no reviews yet.