Description
Launch harder, increase cornering stability, and correct rear suspension geometry on your lowered 2015+ Mustangs, which is easy with upper control arms from BMR Suspension. Stock upper control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tyres. The factory arms also don’t allow for proper camber correction on lowered vehicles. BMR’s Delrin, non-adjustable control arms for Mustangs (UTCA064) are CNC-machined from 6061-T6 billet aluminium. This design gives you a solid control arm that significantly improves performance. Greasable, solid Delrin bushings add a solid, more responsive feel over the stock rubber bushings. BMR’s bushings are internally fluted, allowing grease to coat the inner sleeve evenly. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.
BMR Suspension designed the UTCA064 to work well in street performance, drag race, and handling applications. The stock control arm bushings deflect under cornering loads, giving you inconsistent handling characteristics. BMR’s Delrin bushings are designed to eliminate deflection while standing up to high loads of any performance environment. The UTCA064’s heavy-duty construction and solid Delrin bushings improve repeatability on the street, starting line, or corners. The UTCA064s are primarily designed for lowered cars that want to remove the camber gained from lower-than-stock ride-height vehicles. These are designed longer than factory arms, allowing you to correct the camber setting on lowered S550s. All lowered cars will benefit from these parts IF you want to remove negative camber. These are not the correct choices for those looking to GAIN negative camber. With a 1.2-inch drop, the most negative camber you can get will be approximately -2.0 degrees. These work very well for drag racers who have lowered ride heights and are looking for ZERO camber. BMR’s heavy-duty spherical bearings are designed to solidly link the spindle to the upper control arm and eliminate deflection and wheel alignment changes. Our spherical bearings will withstand high loads of any performance environment, offering all the bind-free suspension articulation needed for excellent handling. Also, these arms save over 4 pounds compared to the OEM set (2.35 lbs per side). On stock-height cars, you cannot exceed -0.50 camber. BMR’s S550 upper control arms add no noticeable NVH. These are the perfect upgrades for enthusiasts looking to improve performance at an affordable price while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!
BMR Suspension’s UTCA064 non-adjustable Delrin upper control arms are available in a durable black anodized finish for long-lasting good looks. They are proudly made in the U.S.A.
Reviews
There are no reviews yet.